Powermatic WP2510 25" Phase 3 Planer
Model No. 1791303- List:
- $19,078.00
- CPO Price:
- $12,499.99
- Sale Price:
- $11,999.99
- You Save:
- $7,078.01 (37%)
The Powermatic® WP2510 Planer has a solid steel helical insert head with four-sided carbide insert knives that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast-iron and has extra-wide side panels that offers rigid bed support and ensures accurate alignment. The segmented, serrated infeed roller with segmented chip breakers has an independent yield of 1/4". The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. A large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. A "Quick-Set" micro-adjustable lever easily raises and lowers the table rollers from 0" to 0.05".
Features: Powermatic WP2510 25" Phase 3 Planer
- Solid steel helical insert head with four-sided carbide insert tooling (no adjustment required after changing knives)
- Reduced sound levels when running and cutting
- Built with digital readout and simple PC controller to make quick and easy table height setups
- Segmented serrated infeed roller with segmented chip breakers for planing multiple height stock
- Each segment has an independent yield of 1/4"
- 3" diameter infeed and outfeed rollers are supported by four large, sealed needle bearings for long life
- Quick-set micro-adjustable lever easily raises and lowers table rollers from 0" to 0.050" with a touch
- Frame machined from heavy cast-iron and extra-wide side panels with gibs offers rigid bed support and accurate alignment
- Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding
- Three-speed feed selector allows you to quickly change feed rates
- Large 32-3/16" x 26" precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
- Massive gearbox maintains a positive feed by using a large chain drive to power the infeed and outfeed rollers
- Gearbox incorporates automatic chain tensioners
- Dust hood features an excellent dust collection system with a built-in 5" dust chute
The Powermatic 1791303 Includes:
- WP2510 25" Planer - 1791303
- Helical Cutterhead w/ Four-Sided Inserts
- Segmented Infeed Rollers
- Segmented Chip Breakers
- Pneumatic Screwdriver
- Dust Hood w/ 5" Dust Port
| Motor Horsepower | 15 HP |
|---|---|
| Motor Type | 3 Phase |
| Motor Voltage | 230/460 Volt; Pre-wired 230 Volt |
| Table Lift Motor | 1/2 HP, 3 Phase |
| Full Width Depth of Cut | 1/8" |
| Maximum Planing Depth | 1/4" |
| Minimum Planing Length | 10" |
| Maximum Planing Thickness | 9" |
| Maximum Planing Width | 25" |
| Infeed Roller Diameter | 3" |
| Outfeed Roller Diameter | 3" |
| Cutterhead Diameter | 3-3/8" |
| Cutterhead Speed | 5,000 RPM |
| Cuts per Minute | 30,000 CPM |
| Number of Knives | 168 Four-Sided Inserts (Helical Head) |
| Feed Rate | 20 FPM, 25 FPM & 30 FPM |
| Dust Port Diameter | 5" |
| Table Size | 32-3/16" x 26" (L x W) |
| Overall Dimensions | 52" x 36" x 59" (L x W x H) |
| Net Weight | 1,725 lbs. |
| Shipping Weight | 1,850 lbs. |
1-Year
Warranty and Service One Year Warranty for Industrial Products WHAT IS COVERED WHO IS COVERED WHAT IS THE PERIOD OF COVERAGE WHAT IS NOT COVERED HOW TO GET SERVICE HOW STATE LAW APPLIES LIMITATIONS ON THIS WARRANTY WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of
WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may
deem necessary for any reason whatsoever.
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located
throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize
warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an
Authorized Service Center in your area call 1-800-274-6848.
(Horizontal Panel Saws, Cut Off Saws, Rip Saws, Bandsaws, Jointers, Planers, Oscillating Edge Sanders, Belt Sanders, Shapers, Power Feeders, Mortisers, Dovetailers)
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables
are excluded from warranty coverage.
This warranty covers only the initial purchaser of the product.
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are
used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to
misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you,
please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses
a defect, we will repair or replace the product, or refund the purchase price, at our option.
We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted
from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to
have the product returned, you will be responsible for the handling and shipping costs of the return.
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED
HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT,
SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Requires Adobe Acrobat Reader to view PDF
