Powermatic 1792800 PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press
You May Also Like These...
- Powered by a heavy-duty 1 HP, 1 Phase, 115/230V (pre-wired 115V) TEFC motor
- Lighted push button switch with safety key is located on the front of the head for ease of use
- A new larger table system with dual extensions for the largest woodworking table on the market
- Also features two T-slot grooves for a miter gauge or other homemade jigs
- Table tilts 90 degrees and has a positive stop at 0 degrees
- Large handle makes lowering and raising the table easy
- Head-mounted dual laser guide system provides a consistent drilling cross point on the workpiece
- Feed handles can be mounted on either side of the drill press for convenient handle positioning
- Extension wing provides additional support for longer workpieces
- Variable speed system adjusts quickly and easily in one full range
- Built-in dual L.E.D. work light
- 5/8-in keyless chuck
- Quick-setting depth stop
- Adjustable split fence with dust collection port
- Front-mounted switch control, laser guide and L.E.D. work light
- PM2800 18-in Variable Speed Drill Press - 1792800
| Horsepower: | 1 HP |
| Phase: | 1 Phase |
| Voltage: | 115/230 Volt; Pre-wired 115 Volt |
| Swing: | 18-in |
| Chuck Capacity: | 5/8-in Keyless |
| Chuck Distance to Table: | 30-in |
| Chuck Distance to Base: | 46-in |
| Drill Travel: | 4-3/8-in |
| Spindle Taper: | MT2 / JT-33 |
| Spindle Speed Range: | 400 - 3,000 RPM |
| Column Diameter: | 3-1/8-in |
| Table Size: | 16-in x 14-in (L x W) |
| Table Size: | 16-in x 26-in (L x W) |
| Base Size: | 11-7/8-in x 19-5/8-in |
| Overall Dimensions: | 68-in x 23-1/2-in x 31-1/2-in (L x W x H) |
| Net Weight: | 287 lbs. |
| Shipping Weight: | 302 lbs. |
Powermatic 5 Year Warranty
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.
Product Reviews
REVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (6)
- Good power output (5)
Cons
Best Uses
- All around (5)
- Frequent use (4)
- Reviewer Profile:
- Avid do-it-yourselfer (7)
REVIEWS
Reviewed by 8 customers
Sort by
Displaying reviews 1-8
Pros
- Easy To Use
- Heavy duty
Cons
Best Uses
- All Around
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
The PM2800 is a solid drill press. I use for a range of applications including woodworking to just jumping on and drilling a hole for random needs. The motor is plenty powerful enough for most uses and the variable speed option is outstanding and quite the spoiler. The large drilling table system is great. The only issue I have ever experienced with this press is the chuck and arbor falling out of the spindle a couple of times but I am assuming that is because I did not have them clean enough for a perfect match fit. Overall I have been very impressed with this drill press and would highly recommend to anyone who wants a great shop tool for a variety of uses.
Pros
- Easy To Use
- Powerful
- Speed change
Cons
Best Uses
- All Around
- Frequent Use
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
The main reason that I wanted this drill press was so I did not have to constantly change belts when changing speeds. This is everything I asked for and more. This is a solid machine. The laser was dead on and no adjustments were needed. I use many different types of bits which require a variety of speeds and this tool saves me a ton of time. The only problem I have had was when I put the largest forstner bit in, after finishing I am unable to turn and release the bit by hand..I have to use a wrench. Not sure why it gets so tight as I have no problems with any of my smaller bits. If I were to make one suggestion, I would like the light to be a bit brighter, but that is minor
Pros
- Easy To Use
- Powerful
Cons
Best Uses
- All Around
- Frequent Use
- Heavy Duty
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
Best drill press I have ever used for woodworking. It has all the power I need/want and is designed for wood. The fence, table and variable speed makes this a true gem. On my old drill press I had to make a table, and fence to make it useful. All the others I looked at seemed more suited to metalworking.
Pros
- Digital Speed Readout
- Easy To Use
- Good Design
- Large Expandable Table
- Laser Guide
- No Bit Slippage
- Plenty of power
- Variable speed
Cons
- Split Fence
Best Uses
- All Around
- Home Shop
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
I have owned this Drill Press for about six months now and have been very satisfied. I love the fully adjustable speed control with a digital readout to show you exactly how fast it is turning. Along with the laser guide and led work light. I would recommend this product to anyone. My only issue is with the adjustable fence. The knobs are too close to the edge of the fence and make it hard to turn, they should provide a little more room.
Pros
- Easy To Use
- Ergonomic Design
- No Bit Slippage
- Powerful
Cons
Best Uses
- All Around
- Frequent Use
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
I really wanted variable speed control without having to change belts. This press delivers that over all the speed range that I need. Long stroke and the hand wheel can be mounted on the left or right. The keyless chuck works nice and holds very small bits well. The laser guides and the little light come in handy sometimes. I wish there was a way to lock the table from the front after adjustment, but I have never seen this done on other machines of this type. I don't use the table extensions or fence. Just not used to having them and they seem get in the way. I fastened the base to a larger piece of plywood for stability and I can slide it around when necessary. Overall a quality machine but I found the design and machining on the cast table tilt mechanism to be sloppy. Would be improved by adding steel sleeves for pin registration of table tilt and an adjustment for front to back tilt to get table square to boring axis.
Pros
- Powerful tool
- Well designed
Cons
Best Uses
- Frequent Use
- Heavy Duty
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
I do production work and find the tool very comfortable to use and the laser makes centering very accurate.
Pros
- Durable
- Easy To Use
- Good Design
- Powerful
Cons
- Awkward depth stop
- No quill lock
Best Uses
- Big Jobs
- Home Use
- Professional Use
- Serious hobbyist
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
In contrast to my previous variable-speed drill presses, this one makes it so dead easy to change speed that I don't anymore operate with some single middling speed that is more often wrong than right. Fire up the 2800, move the handle, read the exact speed, and bingo! You're there. Plenty of power, and the keyless chuck doesn't slip with even the largest of drills. My previous drill press comparatively spoiled me, however, in three ways. First, the 2800 is noisy, owing to the continuously variable belt drive mechanism. (Easy enough to live with, in view of its wonderful speed-changing advantage.) Second, I really would like for there to be a quill lock, and the 2800 doesn't have one -- or at least, I have not been able to locate it. Third, although the depth stop is billed as "rapid change", it actually is not. You have to spin two nuts that lock against one another, one at a time, to get to a new depth position. This is not a huge deal, because I think I will be able to adapt that similar part from another manufacturer (Powermatic does not want other guys mentioned here, so I won't mention that their name is found early in the Greek alphabet.) But go look for a split-nut adjustment mechanism, and if you get the right one, you can replace the Powermatic depth stop at nominal cost. It's a completely minor expense compared with the price of the 2800 and will make it substantially easier and quicker to use. (If I could mention price it would be about a sawbuck.) After a year of use I am very happy with the Powermatic 2800, and although it is a bit pricey I have no regrets on the purchase.
Pros
Cons
Best Uses
Comments about Powermatic PM2800 18-in 1-Phase 1-Horsepower 115/230 Volt Variable Speed Drill Press:
Powermatic doesn't tell you that this shouldn't be on a mobile base (it's tippy)until you read the manual. Much improved stability if you add an empty kitty litter bucket filled with pebbles. Also, drill press squeals at lower speeds
Displaying reviews 1-8
