|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Dust Collection Minimum CFM:||350|
|Dust Port:||4 in.|
|Extension Type:||Cast Iron|
|Max. Dado Blade Width:||13/16 in.|
|Max. Dado Diameter:||8 in.|
|Max. Depth of Cut at 45 Degrees:||2-1/8 in.|
|Max. Depth of Cut at 90 Degrees:||3-1/8 in.|
|Max. Rip Left of Blade:||13-1/2 in.|
|Max. Rip Right of Blade:||50 in.|
|Miter Gauge Type:||Deluxe|
|Motor Type:||Single Phase|
|Motor current:||13 Amp|
|Table Height:||34-1/2 in.|
|Table Size w/ Extension:||42 in. x 30-1/2-in|
|Table Size w/o Extension:||22 in. x 30-1/2 in.|
|Table Type:||Cast Iron|
|Table in Front of Saw Blade at Max. Depth of Cut:||11-1/4 in.|
Reviewed by 1 customer
Displaying review 1
Comments about PM2000 3 HP 10 in. Single Phase Left Tilt Table Saw with 50 in. Accu-Fence, Rout-R-Lift and Riving Knife:
I recently purchased the PM2000 table saw as an upgrade from an $800 table saw I bought 12 years ago and am very happy with the quality and bells and whistles. It's a beautiful machine...with a couple of exceptions. The built in caster system is difficult to use in that it takes quite a number of rotations of the hand wheel to raise/lower the cabinet. It is also very difficult to move the table saw once raised off the floor. I would prefer using locking wheels under the cabinet as well as the table as I used on my old saw. My biggest complaint is with the arbor lock. The first time I switch blades, I learned a hard lesson. The arbor lock is very difficult on my fingers. It must be held in place while removing the arbor nut. I ended up using a screw driver to hold it in place while attempting to remove the very tight arbor nut. The arbor lock bent and is no longer useable. Now I'm out an arbor lock and will use my old tried and true method of removing the arbor nut. I would give the saw a 5 star rating if I could have bought it without the casters and arbor lock. I love the dust collection system! I also love the power and low noise of the motor. The details that powermatic incorporates make using this saw a pleasure to use. Cutting any board, whether maple, ebony or zebra wood, is like cutting butter!
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Can the router lift be upgraded to the Mast-R-Lift II. The lift specified limits the routers that can be used.
A:This question would be better answered by a JET technician. For assistance please call 1-800-274-6848
Q:It appears that the riving knife that comes with the saw is standard kerf thickness and that a thin kerf riving knife can be ordered as an accessory. Is that correct?
A:The saw does come with a standard thickness Knife and you can order a low profile riving knife.
A:Correct, the table saw includes a standard riving knife. Other accessories can be purchased on line at www.powermatic.com.
JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday
The general warranty lasts for the time period specified in the literature included with your product or on the official JET, Wilton or Powermatic branded websites.
This warranty covers only the initial purchaser of the product from the date of delivery.
This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance.
Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof of initial purchase when calling. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed. JET, Wilton and Powermatic have Authorized Service Centers located throughout the United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service Center Locator on the JET, Wilton or Powermatic website.
JET, Wilton and Powermatic are constantly adding new products. For complete, up-to-date product information, check with your local distributor or visit the JET, Wilton or Powermatic website.
This warranty gives you specific legal rights, subject to applicable state law.
JET, WILTON AND POWERMATIC LIMIT ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. JET, WILTON AND POWERMATIC SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. JET, Wilton and Powermatic sell through distributors only. The specifications listed in JET, Wilton and Powermatic printed materials and on official JET, Wilton and Powermatic-branded websites are given as general information and are not binding. JET, Wilton and Powermatic reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded products are not sold in Canada by JPW Industries.
NOTE: JET, Wilton and Powermatic are divisions of JPW Industries. References in this document to JET, Wilton and/or Powermatic also apply to JPW Industries or any of its successors in interest to the JET, Wilton and/or Powermatic brands.