Model#: PWMN1791264K
Condition:
New

What are the different product conditions?

New
Brand new items;Full manufacturer warranty available
Reconditioned
Manufacturer inspected, repaired and tested items; CPO 60 day money back guarantee
Open Box
New or Recon items with possible minor cosmetic damage; CPO 60 day money back guarantee
Certified
Returned items inspected, repaired and tested by CPO technicians; CPO 60 day money back guarantee

Powermatic 719T 1-Phase 1-Horsepower 115/230V Tilt Table Mortiser

  • Powermatic 719T 1-Phase 1-Horsepower 115/230V Tilt Table Mortiser
This item ships freight. Need a liftgate? Details.

Freight Orders

Freight deliveries require a delivery time be scheduled and someone must be present at the time of delivery to inspect and sign for the merchandise. A representative from the freight carrier will call the phone number entered at checkout to schedule the delivery.


Liftgate Service

For freight deliveries, you have the option of adding a liftgate to your delivery. A liftgate is the device that lowers a product from the truck to ground level.

CPO recommends adding liftgate service for freight deliveries exceeding 100 lbs if you do not have a loading dock or fork lift at the delivery address. Additional charges may apply. The liftgate option will be presented during the checkout process.

Please note that liftgate service only ensures the product is removed from the truck. We recommend you have the additional help of two to four people to move the product to its desired location because drivers are not required to assist.

Requesting liftgate service after ordering may result in additional charges and delays.

Out of Stock
Want an email when it's back in stock?

Details

The 719T Tilt Table Mortiser features heavy-duty cast-iron construction and a powerful 1 HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack-and-pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. The large 20-1/4 in. x 7 in. table gives plenty of work support and will adjust to any angle between 0 and 35 degrees. Adjustable linear stops and flip down stop allow for precise repeatability. The quick-adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpiece. Heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.
Features:
  • 1 HP TEFC motor
  • Work stop for repeat cuts
  • Depth and length stops
  • Enclosed stand with shelf
  • Drill bit adapter
  • Quick-release vise for speedy release of work material
  • Chuck extension adapter
Includes:
  • 719T 1 HP Tilt Table Mortiser - 1791264K
  • Chisel & Tool Holder
  • 1/2 in. Drill Chuck
  • 4 in. Chuck Key
  • Removable Safety Switch Key
Downloads:

Specifications

Net Weight: 276 lbs.
Shipping Weight: 292 lbs.

Recommendations

Reviews

4.7 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
3
0
0
0
Recommendations
Yes, I would recommend this to a friend (9)
Pros
Easy To Use (8)
Powerful (8)
Ergonomic Design (1)
Cons
Heavy (2)
Best Uses
Frequent Use (3)
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
YOU GET WHAT YOU PAY FOR
Easy set-up, but heavy. Assembly tip: lay the machine on its back, attach the base, then stand it up. I did it myself, but with an extra person you could avoid the potential hernia.
Quiet, powerful and accurate. Could you ask for more from a tool. Fit and finish were top notch. I fitted mine with the premium Lee Valley chisels and they do not require the chuck extension (supplied). So far have only done some test cuts and have been impressed. I will be adding a lift to the base as it's quite short for me, I'm 6'4" and find it uncomfortable leaning over that much.
I considered a benchtop unit but didn't want to contemplate upgrading in 6 months (been there, done that). This machine should fit my present and future needs.
November 28, 2009
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Cons
Heavy
A major workhorse
I do a lot of interior yacht carpentry and have recently been dabbling with some custom furniture for home use; this unit is a major time saver! The table clamp and ability to move the table L-R as well as front-back (versus having to adjust the work piece) is wonderful when it comes to ganging pieces up and doing a lot of consistent and accurate mortises. Well worth the price tag! Accuracy and finish are top notch and it's operation is quiet and fluid. [...]once set up the weight is a welcome benefit (this thing is rock solid and does not vibrate). Very happy with it!
February 12, 2010
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Ergonomic Design
Powerful
Best Uses
Frequent Use
Accurate and percise
Ease of use;timesaver;percise
October 19, 2011
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Cons
Heavy
Best Uses
Frequent Use
Accurate with clean cuts
Heavy and solidly built. Mortise cuts are clean, and accurate. Being able to move the table is a great time saver when it comes to indexing the cuts. Great tool. If you don't have a helper when putting together, lay the tool on its back. Attach the cabinet and lift the unit up as a whole.
April 23, 2012
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Great Tool. Build Like A Rock
I was pretty impressed with how beefy and sturdy this tool is. It seems like the stand could be like a foot taller but I'm not going to let that sway my review. The tool does exactly what its supposed to do and it seems like it will last forever. I can't believe how fast I can make mortises now.
February 17, 2013
Recommendations
Yes, I would recommend this to a friend
Great Mortiser
I make Tables Chairs & Bar stools Very smooth operation easy to repeat mortise holes.Very powerful cuts through oak,cherry & Mahogany with ease. I would highly recomend this to a friend
November 29, 2013
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Powerful Mortiser
This mortiser works very well. After properly adjusting, you can cut mortises cleanly & quickly. The table has adjustable gibbs to take out any play. The table & fences were flat. It has adjustable stops for cutting the mortise length & an adjustable stop for placing your work piece on the table. This makes repeating operations quick and easy. This mortiser on sale was double the cost of a good bench top model, but it is 10 times the machine. If you build furniture or doors using a lot of mortises you should definitely consider purchasing this machine. It will really cut down on the time you spend cutting mortises. CPO had this mortiser drop shipped from Powermatic. It was delivered in 4 days in perfect condition. I have never had a bad purchasing experience from CPO. Note: The mortiser table is slightly low, @32.5" from the floor, so you might consider building a fixed or rolling base to raise it up a few inches. I'm 6'5" and built a 7" rolling base to raise the table to 39.5"
October 16, 2014
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Best Uses
Frequent Use
Initial opinions on 719T Mortiser
Just getting started with it, but the product was shipped quickly and arrived in great shape.

Initial feelings are that it was too low. I am 6'1" and the table was down below my waist. Much like the Laguna SUV14" bandsaw. I put both on 8" platforms and they are much more ergonomic for me.

The setup was very easy and took around 30-45 minutes. Initially the plunging action was very stiff, but I cleaned up the ways and used a little white lithium grease on them and the action is better.

Have not done a ton of work with it yet, but love the x-y table feature as well as the quick clamping feature and it seems like it will have tons of power.

All the reviews I read on this machine before purchasing were favorable and I would agree with all of them.
March 20, 2013
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Great Purchase
The only down side, not made in the USA
April 10, 2011

Questions & Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Does this come with any bits?
Fyrfightnfool on Nov 24, 2015
BEST ANSWER: The Powermatic 1791264k does not come with any bits.
Is this mortiser made in the USA?
bill on Jan 31, 2015
BEST ANSWER: Hi Bill,

This item is manufactured in Taiwan.

Warranty

JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday

MORE INFORMATION

The general warranty lasts for the time period specified in the literature included with your product or on the official JET, Wilton or Powermatic branded websites.

  1. • JET, Wilton and Powermatic products carry a limited warranty which varies in duration based upon the product. (See points below)
  2. • Accessories carry a limited warranty of one year from the date of receipt.
  3. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects.

WHO IS COVERED

This warranty covers only the initial purchaser of the product from the date of delivery.

WHAT IS COVERED

This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance.

WARRANTY LIMITATIONS

Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.

HOW TO GET TECHNICAL SUPPORT

Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof of initial purchase when calling. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed. JET, Wilton and Powermatic have Authorized Service Centers located throughout the United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service Center Locator on the JET, Wilton or Powermatic website.

MORE INFORMATION

JET, Wilton and Powermatic are constantly adding new products. For complete, up-to-date product information, check with your local distributor or visit the JET, Wilton or Powermatic website.

HOW STATE LAW APPLIES

This warranty gives you specific legal rights, subject to applicable state law.

LIMITATIONS ON THIS WARRANTY

JET, WILTON AND POWERMATIC LIMIT ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. JET, WILTON AND POWERMATIC SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. JET, Wilton and Powermatic sell through distributors only. The specifications listed in JET, Wilton and Powermatic printed materials and on official JET, Wilton and Powermatic-branded websites are given as general information and are not binding. JET, Wilton and Powermatic reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded products are not sold in Canada by JPW Industries.

Product Listing with Warranty Period

  1. • 90 Days – Parts; Consumable items; Light-Duty Air Tools
  2. • 1 Year – Motors; Machine Accessories; Heavy-Duty Air Tools; Pro-Duty Air Tools
  3. • 2 Year – Metalworking Machinery; Electric Hoists, Electric Hoist Accessories; Woodworking Machinery used for industrial or commercial purposes.
  4. • 5 Year – Woodworking Machinery
  5. • Limited Lifetime – Wilton branded products; JET Parallel clamps; VOLT Series Electric Hoists Manual Hoists; Manual Hoist Accessories; Shop Tools; Warehouse & Dock products; Hand Tools

NOTE: JET, Wilton and Powermatic are divisions of JPW Industries. References in this document to JET, Wilton and/or Powermatic also apply to JPW Industries or any of its successors in interest to the JET, Wilton and/or Powermatic brands.