|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Blade Tilt Range:||0 - 45 Degrees|
|Dado Blade Diameter (Max.):||8 in.|
|Dado Blade Width (Max.):||13/16 in.|
|Depth of Cut (45 Degrees):||2-1/8 in.|
|Depth of Cut (90 Degrees):||3-1/8 in.|
|Extension Type:||Laminate Table|
|Max. Rip Capacity (Left):||12 in.|
|Max. Rip Capacity (Right):||30 in.|
|No-Load Speed (RPM):||3450|
|Table Clearance (Front of Blade):||11-1/2 in.|
|Table Depth:||27 in.|
|Table Height:||36 in.|
|Table Type:||Cast Iron|
|Table Width:||20-1/8 in.|
|Table Width (w/ Extension):||71-1/4 in.|
|Table Width (w/ Wings):||44-1/4 in.|
|Wing Type:||Cast Iron|
Reviewed by 1 customer
Displaying review 1
Comments about 64B 1-3/4 HP 10 in. Single Phase Left Tilt Table Saw with 30 in. Accu-Fence and Riving Knife:
I purchased this model because I felt it has the best features, quality, and value for under $2000. I would have preferred the cabinet model, like the PM1000, but my shop isn't suited to have the saw permanently placed and I really wanted to keep the cost closer to $1500. I have it on a mobile base, but so far, stability and rigidity have not been an issue. It is also wired to run on 230V which I have found keeps the motor running cool and at a consistent speed.
It easily rips through plywood and solid woods (I've gone as thick as 1.5" so far) and the fence is sturdy and accurate. It took me a few hours to get the saw tuned up out of the box (i.e. assembly, truing/squaring the blade & fence, adjusting the bevel stops, mounting the cast iron wings, etc.), but once that was done, everything has been going great. I thought the really crucial aspects like squaring the blade and fence needed minimal changes from the factory. The miter gauge is surprisingly beefy and has positive stops for making angled cuts. Having the blade run off a belt eliminates wobble and the trunnion appears very solid.
Overall, I think the 64b is the best option for those looking for a professional alternative to a cabinet saw.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:DOES THIS SAW HAVECABINET MOUNTED TRUNNIONS
Q:I am looking for a zero clearance insert for this product measuring 18 7/8 x 3 3/4 x 3/8. Any idea where I can purchase one?
A:Rockler woodworking and hardware has table saw inserts with zero clearance.
A:We do carry a zero clearance insert, but to these specs. You can contact Powermatic directly at 1-800-274-6848. They can assist you.
JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday
The general warranty lasts for the time period specified in the literature included with your product or on the official JET, Wilton or Powermatic branded websites.
This warranty covers only the initial purchaser of the product from the date of delivery.
This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance.
Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof of initial purchase when calling. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed. JET, Wilton and Powermatic have Authorized Service Centers located throughout the United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service Center Locator on the JET, Wilton or Powermatic website.
JET, Wilton and Powermatic are constantly adding new products. For complete, up-to-date product information, check with your local distributor or visit the JET, Wilton or Powermatic website.
This warranty gives you specific legal rights, subject to applicable state law.
JET, WILTON AND POWERMATIC LIMIT ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. JET, WILTON AND POWERMATIC SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. JET, Wilton and Powermatic sell through distributors only. The specifications listed in JET, Wilton and Powermatic printed materials and on official JET, Wilton and Powermatic-branded websites are given as general information and are not binding. JET, Wilton and Powermatic reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded products are not sold in Canada by JPW Industries.
NOTE: JET, Wilton and Powermatic are divisions of JPW Industries. References in this document to JET, Wilton and/or Powermatic also apply to JPW Industries or any of its successors in interest to the JET, Wilton and/or Powermatic brands.