|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Blade Tilt Range:||0 - 45 Degrees|
|Dado Blade Diameter (Max.):||8 in.|
|Dado Blade Width (Max.):||13/16 in.|
|Depth of Cut (45 Degrees):||2-1/8 in.|
|Depth of Cut (90 Degrees):||3-1/8 in.|
|Extension Type:||Laminate Table|
|Max. Rip Capacity (Left):||12 in.|
|Max. Rip Capacity (Right):||50 in.|
|No-Load Speed (RPM):||4200|
|Table Clearance (Front of Blade):||10 in.|
|Table Depth:||27 in.|
|Table Height:||34-1/4 in.|
|Table Type:||Cast Iron|
|Table Width:||20 in.|
|Table Width (w/ Extension):||83 in.|
|Table Width (w/ Wings):||40 in.|
|Wing Type:||Cast Iron|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Can the motor be rewired for 220 volts and if so are instructions included on how to do it?
A:No it can not. If you need 220, you will need to view the PM2000 models
Q:How long does this product take to arrive within continental US? (Montrose Colorado)
A:This item is currently out of stock.Normal ship time on a stocked item is 5-6 business days.
Q:Does fence and blade need to be tuned out of box
A:No, each saw is calibrated at JPW before shipping. So unless there is noticeable damage to the shipping container, the saw should not need adjustment
Q:Is there a dado insert for the pm1000?
A:Yes,the Dado insert is model# # 708097 – Dado Insert
Q:Could you tell me which mobile base is best for this saw?
A:Powermatic recommends the model 708119 universal mobile base and the 708158 extension kit.
Q:An earlier questioner asked if the PM1000 included a riving knife; the answer was "No." Is one available as an option? If so, is the installation straight-forward?
A:The riving knife is available on the PM2000.Unfortunately,this is not an option for the PM1000 as an accessorie.
A:This saw will arrive in 3 boxes; (1) motor, (2) Fence and rails, & (3) Table.
Q:is the wheel assembly available for this model?
A:Please call Powermatic for parts at 1-800-274-6848.
Q:Does the PM1000 include a full kerf riving knife?
A:No, this saw will not include a riving knife.
Q:What is the right side wing of this saw made of?
A:It is made from ground cast iron.
A:It's a smooth Formica top. The inside is particle board. It is secured to the saw itself and the rails on either side.
Q:Can the PM1000 be re-wired for 220V electric power/service?
A:This is rated at single phase, 115/230 volts.
Q:Under the "Features" section it lists a miter gauge and under the "Included" list the miter gauge is not listed. Does it come with a miter gauge and does it include table inserts?
A:Yes, the miter gauge is included.
JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday
The general warranty lasts for the time period specified in the literature included with your product or on the official JET, Wilton or Powermatic branded websites.
This warranty covers only the initial purchaser of the product from the date of delivery.
This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance.
Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof of initial purchase when calling. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed. JET, Wilton and Powermatic have Authorized Service Centers located throughout the United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service Center Locator on the JET, Wilton or Powermatic website.
JET, Wilton and Powermatic are constantly adding new products. For complete, up-to-date product information, check with your local distributor or visit the JET, Wilton or Powermatic website.
This warranty gives you specific legal rights, subject to applicable state law.
JET, WILTON AND POWERMATIC LIMIT ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. JET, WILTON AND POWERMATIC SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. JET, Wilton and Powermatic sell through distributors only. The specifications listed in JET, Wilton and Powermatic printed materials and on official JET, Wilton and Powermatic-branded websites are given as general information and are not binding. JET, Wilton and Powermatic reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded products are not sold in Canada by JPW Industries.
NOTE: JET, Wilton and Powermatic are divisions of JPW Industries. References in this document to JET, Wilton and/or Powermatic also apply to JPW Industries or any of its successors in interest to the JET, Wilton and/or Powermatic brands.