|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Dust Collection Minimum CFM:||350|
|Extension Type:||Cast Iron|
|Max. Dado Blade Width:||13/16-in|
|Max. Dado Diameter:||8-in|
|Max. Depth of Cut at 45 Degrees:||2-1/8-in|
|Max. Depth of Cut at 90 Degrees:||3-1/8-in|
|Max. Rip Left of Blade:||12-in|
|Max. Rip Right of Blade:||30-in|
|Motor Current:||15/7.5 Amps|
|Motor Type:||Single Phase|
|Table Size w/ Extension:||40-in x 27-in|
|Table Size w/o Extension:||20-in x 27-in|
|Table Type:||Cast Iron|
|Total Work Surface Area:||57-in x 27-in|
Reviewed by 1 customer
Displaying review 1
In talking with PM Tech Support I got one of the first 100 machines off of the assembly line. I was not disappointed. The machine is perfect.
The packaging was very good and the delivery was outstanding. The unit comes in 4 boxes; Saw, Fence, Motor cover and Fence Rails. The total shipping weight is 420 LBS. I took my time assembling the machine and found the Manual/Instructions very good.
The machine is a new product so some of the accessories like the Dado Insert and thin kerf riving knife are not available yet. I was a little disappointed with that.
Power Requirements - There is a lot of confusion on the power requirements for the saw. The internet and manual quotes it requires a 30amp 110 circuit. This is wrong. The saw comes with a standard 110 plug and works on a dedicated 20amp circuit. I discussed the issue with Powermatic Tech Support and they have corrected the internet manuals and will revise the literature that comes with the saw.
I also purchased the mobile base (JET PART NO.) and it works well with the unit. I did have to cut an inch off of two of the bars and drill two new holes because I wanted the base to fit perfectly to the saw base. If you don't mind an inch gap between the saw base and the mobile base you would not have to alter the base.
CPO Ordering was perfect. The order was placed immediately and I received an electronic confirmation the same day. The saw was delivered directly from the manufacturer in 5 business days. The delivery person rolled the unit into my garage for unpacking. All in all, it was a great experience. Thanks CPO.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:What base will work with the PM1000?
A:The model number of the mobile base is 708119.
Q:Which mobile base fits the PM1000 saw?
A:The model number of the mobile base is 708119.
Q:Does the PM1000 have Built-in retractable caster system like the PM2000?
A:No, the PM1000 does not include the retractable casters.
JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday
The general warranty lasts for the time period specified in the literature included with your product or on the official JET, Wilton or Powermatic branded websites.
This warranty covers only the initial purchaser of the product from the date of delivery.
This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance.
Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof of initial purchase when calling. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed. JET, Wilton and Powermatic have Authorized Service Centers located throughout the United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service Center Locator on the JET, Wilton or Powermatic website.
JET, Wilton and Powermatic are constantly adding new products. For complete, up-to-date product information, check with your local distributor or visit the JET, Wilton or Powermatic website.
This warranty gives you specific legal rights, subject to applicable state law.
JET, WILTON AND POWERMATIC LIMIT ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. JET, WILTON AND POWERMATIC SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. JET, Wilton and Powermatic sell through distributors only. The specifications listed in JET, Wilton and Powermatic printed materials and on official JET, Wilton and Powermatic-branded websites are given as general information and are not binding. JET, Wilton and Powermatic reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded products are not sold in Canada by JPW Industries.
NOTE: JET, Wilton and Powermatic are divisions of JPW Industries. References in this document to JET, Wilton and/or Powermatic also apply to JPW Industries or any of its successors in interest to the JET, Wilton and/or Powermatic brands.