Powermatic 1790807K PF-31 1-Phase 1-Horsepower 115 Volt 4-Speed Power Feeder
- Features a continuous-duty motor that transfers power from the gearbox to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of material
- Fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical or angled feed positions
- Solid cast-iron construction of body, base and universal joints provide stability and vibration-free feeding
- Smart roller system provides money saving wheel changes by allowing the replacement of the tire only
- PF-31 1 HP 4-Speed Power Feeder - 1790807K
|Motor Type:||1 Phase|
|Motor Voltage:||115 Volt|
|Rollers:||4-3/4-in x 2-1/4-in (Dia. x W)|
|Distance Between Rollers:||5.07-in - 5.90-in|
|Rotation:||Forward and Reverse|
|Number of Speeds:||4 Speeds|
|Fpm:||13, 36, 43 and 108 FPM|
|Vertical Range Of Adjustment:||9.83-in|
|Horizontal Range Of Adjustment:||18.07-in|
|Maximum Height of Rollers Parallel to Tabletop:||8.45-in|
|Overall Dimensions:||43.23-in x 18.08-in x 29.5-in (L x W x H)|
|Net Weight:||134 lbs.|
|Shipping Weight:||143 lbs.|
Powermatic 1 Year Warranty
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
One Year Warranty for Industrial Products
(Horizontal Panel Saws, Cut Off Saws, Rip Saws, Bandsaws, Jointers, Planers, Oscillating Edge Sanders, Belt Sanders, Shapers, Power Feeders, Mortisers, Dovetailers)
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848. You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.
Reviewed by 1 customer
Displaying review 1
- Good Grip
- Little deflection
- In The Workshop
Comments about PF-31 1-Phase 1-Horsepower 115 Volt 4-Speed Power Feeder:
The PF-31 is a well built feeder. I have used a smaller feeder and now prefer the PF-31 over that feeder for several reasons. One of the big reasons is that the joints hold under pressure. The tubes and the clamps are large enough that they are not moved during heavy use and the clamp handles are large enough to use by hand and get enough holding force. Also the articulating joints are self holding tapers and again don't move during heavy use. I also like the fact that you can easily switch gears between high and low speeds without having to change the gears. For example you can run 42 feet per minute roughing passes then switch the selector and run a finish pass at 13 feet per. I also switched the rollers to a belt from Western Roller Corporation, works great for short pieces. The amount of wheel travel is more than some, again making set-up easier. All in all, a very nice feeder. On the down side, it's big and heavy, but if you go for the smaller feeders you will be disappointed. You can see me using the feeder to demonstrate a raised panel on YouTube [@]